11 x 15 Cam Boat Tackle Hatch
Extra tackle storage is always a necessity on a boat. The TEMPRESS Marine Access Tackle Systems provide just that. The 1115 Access Cam Tackle Hatch features 4 individual removable boxes with lids. The boxes lock into position to prevent sliding out while under way or in rough weather with the door open. The Cam Tackle uses the same hatch as our 1115 Access Cam, and can also be retrofitted with a locking mechanism. Only compatible with TEMPRESS #70090 tackle boxes.
Brand: TEMPRESS
Warranty: 1 Year
1115 Cutout = 8 5/8" x 12 5/8"
1115 Depth = 7"
1115 Outside = 10 3/4" x 15 1/8"
Fasteners Required 10ea. #12 Pan Head self tapping screws
Q: Is the liner removable?
Yes, the liner snaps into place and can be removed if needed for access underneath the liner.
Q: Does it come with the tackle boxes?
Yes, this item will come with the 4 semi transparent tackle boxes as shown in the picture.
Q: Once installed how far down does the liner go?
The liner is approximately 7 1/8 inches deep after it is installed.
4.8 20 reviews
great
AAdamVerified buyerReally like the tackle hatch storage. 10 stars
DGDexter G.Verified buyerI bought an old boat and tried to replace the old tackle hatch with a new one from Tempress. The new hatch did not fit the existing cutout properly. Though not their fault, Tempress took back the new hatch no questions asked. I was able to talk to an actual human and get help returning the hatch. I appreciate their personal service and standing behind their product.
PZPaul Z.Verified buyerawesome product, installed in seat base on each side of my boat which allowed us to get our tackle boxes off the floor and out of the boat. bought extra trays so we could load them with other tackle for different types of fishing. life is good!!
RLRichard L.Verified buyerThe hatch is great. I would buy it again. I do get water inside my hatches when it rains. I have new seals on this hatch. The other day i opened it up and there was about 4 or 5 tablespoons of water in the bottom of the tackle base. So to fix it, I drilled 2 small drain holes. I installed it with a heavy seal of silicone. Not sure where the water is entering.
JAJoseph A.Verified buyer
I have this tackle hatch but my inserts have broken off. What is the proper part number for a replacement hatch liner?
Hi John. Our 1115 Tempress Slam or Cam hatch works with our 1115 Liner (2 options). Part number 41400 is our 1115 liner without ribs for tackle boxes. Part number 70092 will be our 1115 Liner with ribs for the tackle box trays. You can use the search bar at the top right hand side of our page to find these part numbers easily at our website!